FAIL (the browser should render some flash content, not this).

Pool Construction Process


Construction step by step:

Pre-construction:

  • Personal design assistance by a Hallmark Pools design consultant
  • Pre-excavation meeting for approval of layout in backyard
  • Permits from the local city or county will be obtained and posted
  • Notifications will be sent to the local utility companies for location of elec., sewer, gas…
  • Temporary construction fencing at access point for safety and liability

Excavation:

  • Expert drivers on a rubber tire loader will help to minimize damage to concrete drives, walkways, landscaping, and grass during excavation
  • During excavation a Hallmark Pools & Spas construction supervisor will be present to set the elevation of the pool, which is crucial for proper drainage
  • All interior areas of the pool are hand trimmed by experienced professionals
  • Prior to completion of this stage a Hallmark Pools & Spas construction supervisor will insure that all floors and walls are trimmed per design and that proper compaction has been achieved

Steel reinforcement:

  • Bond beam - 4 bars #4 (1/2”) continuous
  • Walls and floor - #3 (3/8”) 8” on center
  • Deck dowels every 4' (3/8” rebar connecting the gunite shell to the pool decking)
  • All steel tied to the highest Hallmark Pools & Spas standards

Gunite Structure:

  • Pneumatically applied gunite
  • Walls and floor – minimum 6” thick and hand trimmed by experienced professionals
  • Gunite bond beam – 12” wide x 18” deep (top portion of pool shell)
  • 4,000 – 5,000 PSI ----- NSPI minimum is 3,500 PSI
  • Lifetime gunite shell warranty that is transferable to a future owner

Tile & Coping:

  • 6” frost proof, acid proof decorative tile. Five year warranty on tile
  • A wide selection of the following copings: Bullnose brick, Flagstone with chiseled or polished face, Travertine, Canterra, Torrean, Five year warranty on coping …
  • Also available is hand sculpted manmade coping and boulders

Pool Plumbing:

  • All sch40 PVC is used for the hydraulic system
  • Pipe diameters are determined by calculating the flow rates desired for certain pumps, filters, spas, and water features
  • Suction ports entering the pool or spa are installed using NSPI guidelines for safety
  • An automatic fill device is installed on all pools to save time and money
  • The hydraulic system will be pressure tested after completion. This will save time through construction by avoiding any unexpected leaks in the system

Pool Decking:

  • We provide you with a wide range of materials: Pea gravel, Ideal deck, Travertine, Brick pavers, Flagstone, Stamped cement, Sculpted gunite…
  • All decks are poured a minimum of 4” thick with piers with a 2 year warranty
  • Interlocking steel bars are installed between all expansion joints, this allows for no deviation from one concrete section to another
  • Hallmark Pools & Spas. uses 3/8” re-bar 15” o.c. for reinforcement, not just wire mesh

Electric:

  • All electrical wiring is installed per city, county and NSPI codes and guidelines
  • Lighting circuits installed in the pool are all GFCI protected for safety
  • We have the ability to install automated control systems for your convenience (these systems are installed so that you may control your pool with the touch of a button)

Plaster:

  • 2 coats of white marble plaster troweled by hand to a fine finish with a 5 year warranty
  • We also have custom surfaces such as Sunstone, Hydrazzo, Diamond Brite…

Pool Equipment:

  • Pump – TriStar Energy Solution™
  • Heater – Hayward H-Series Pool & Spa Heaters
  • Filter - Pro-Grid™ Vertical Grid D.E. Filters
  • Cleaner – Viio Turbo™ Automatic Pool Cleaner w/Booster Pump
  • Chlorinator - Aqua Rite™ Salt Chlorine generator
  • Spa blower – Polaris QT (quietest blower on the market)
  • Valves – 2” Jandy 3 way
  • Controls – Pro Logic with wireless Aqua Pod
  • Full 5-year parts and labor warranty on all Jandy products with some components extended to 20 years.

Post construction:

  • Before filling a sample of your tap water will be tested so that we may know the exact chemical start-up necessary for your pool. This saves costly mistakes.
  • Your pool will be started, cleaned and fine tuned then we will instruct your family on how to operate your new swimming pool

Additional features included in pool:

  • 2 automatic skimmers plumbed and valved independently
  • 6 adjustable returns with wall fittings
  • Dual main drains on all suction lines other than skimmers for safety and flow factors
  • All lighting systems are custom designed for each particular pool
  • Dedicated line for cleaner
  • All manual maintenance equipment: pole, brush, vacuum hose, net, test kit…

Additional features included in spa:

  • 6 adjustable, interchangeable hydrotherapy jets with triple line manifold
  • 21/2” suction and return lines
  • 100 watt halogen light with blue and red lenses
  • Designed for constant filtration during pool mode
  • Hand sculpted multilevel, contoured benches
Next: Swimming Pool FAQ's
Building luxury swimming pools in Houston, Katy, Sugar Land, and surrounding areas for over 20 years!
Houston Pool Builder Swimming Pool Tips Swimming Pool FAQ's Pool Construction Process Swimming Pool Renovations Pool Links & Resources
© 2009 Hallmark Pools & Spas
www.hallmarkpools.net
Website Design by PugHouse Productions